86-513-83748988
HY Series CY Series HA2F Series HA2F(O)(M) Series HA4V Series HA7V Series HA10V(S)O/31 Series HA10V(S)O/32 Series HA10V(S)O/52 Series HA10V(S)O/53 Series HA10VNO/5* Series HA15V Series
  • Size 5 to 1000
  • Nominal pressure 400 bar
  • Max. pressure 450 bar
  • Open and closed circuits
  • Metric model, inclined shaft design
  • High starting efficiency, high total efficiency
  • Optional integrated relief valve
  • Additional valves that have been installed can be optional: balance valve, wash oil walve
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
Technical parameters (theoretical values, excluding efficiency and tolerances, approximate values)
Size NG 5 10 12 16 23 28 32 45 56 63 80
Displacement (per revolution) Vg cm³ 4.93 10.3 12 16 22.9 28.1 32 45.6 56.1 63 80.4
Max. speed nnom rpm 10000 8000 8000 8000 6300 6300 6300 5600 5000 5000 4500
nmax rpm 11000 8800 8800 8800 6900 6900 6900 6200 5500 5500 5000
Inlet flow nnom and Vg qv l/min 49 82 96 128 144 177 202 255 281 315 362
Torque Vg and Δp = 350 bar T Nm 24.7 57 67 89 128 157 178 254 313 351 448
Δp = 400 bar T Nm – 66 76 102 146 179 204 290 357 401 512
Rotational stiffness c kNm/rad 0.63 0.92 1.25 1.59 2.56 2.93 3.12 4.18 5.94 6.25 8.73
The moment of inertia of the rotor group JGR kgm² 0.00006 0.0004 0.0004 0.0012 0.0012 0.0012 0.0024 0.0042 0.0042 0.0072 0.0072
Max. angular acceleration α rad/s² 5000 5000 5000 5000 6500 6500 6500 14600 7500 7500 6000
Case volume V L 0.17 0.17 0.17 0.20 0.20 0.20 0.20 0.33 0.45 0.45 0.55
Weight (approximate) m kg 2.5 5.4 5.4 5.4 9.5 9.5 9.5 13.5 18 18 23
Technical parameters (theoretical values, excluding efficiency and tolerances, approximate values)
Size NG 90 107 125 160 180 200 250 355 500 710 1000
Displacement (per revolution) Vg cm³ 90 106.7 125 160.4 180 200 250 355 500 710 1000
Max. speed nnom rpm 4500 4000 4000 3600 3600 2750 2700 2240 2000 1600 1600
nmax rpm 5000 4400 4400 4000 4000 3000 – – – – –
Inlet flow nnom and Vg qv l/min 405 427 500 577 648 550 675 795 1000 1136 1600
Torque Vg and Δp = 350 bar T Nm 501 594 696 893 1003 1114 1393 1978 2785 3955 5570
Δp = 400 bar T Nm 573 679 796 1021 1146 1273 – – – – –
Rotational stiffness c kNm/rad 9.14 11.2 11.9 17.4 18.2 57.3 73.1 96.1 144 270 324
The moment of inertia of the rotor group JGR kgm² 0.0072 0.0116 0.0116 0.0220 0.0220 0.0353 0.061 0.102 0.178 0.55 0.55
Max. angular acceleration α rad/s² 6000 4500 4500 3500 3500 11000 10000 8300 5500 4300 4500
Case volume V L 0.55 0.8 0.8 1.1 1.1 2.7 2.5 3.5 4.2 8 8
Weight (approximate) m kg 23 32 32 45 45 66 73 110 155 325 336
Order type
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
HA2F M / 6 W - V
Operating liquid type
01 Mineral oil and HFD₀. HFD is suitable for size 250 to 1000, Can only be used in combination with long life bearing "L" (No code)
HFB、HFC Hydraulic oil suitable for size 5 to 200 (No code)
suitable for size 250 to 1000 (only be used in combination with long life bearing "L") E-
Axial piston element
02 Inclined shaft design, fixed displacement motor HA2F
Drive shaft bearing 5...200 250...500 710...1000
03 Standard bearing (no code) ● ● -
Long-life bearing - ● ●
Operating mode
04 Motor M
Size(NG)
05 Displacement Vg Max [cm³] 5 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180 200 250 355 500 700 1000
Series
06 6
Index
07 Size 10...180 1
Size 200 3
Size 5 and size 250...1000 0
Direction of rotation
08 From the end of the shaft Bi-directional, reversible W
Sealing material
09 FKM (Viton) V
Driving shaft
10 Size 5 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180 200 250...1000
Splined shaft according to DIN 5480 - ● ● ● ● ● ● - ● ● ● ● ● ● ● ● ● - A
- ● ● - ● ● - ● ● - ● - ● - ● - - ● Z
Parallel key shaft according to DIN 6885 ● ● ● ● ● ● ● - ● ● ● ● ● ● ● ● ● - B
- ● ● - ● ● - ● ● - ● - ● - ● - - ● P
Conical shaft ● - - - - - - - - - - - - - - - - - C
Mounting flange 5...250 355...1000
11 ISO3019-2 Flange 4 holes ● - B
8 holes - ● H
Oil port, valve and fastening thread configuration
12 Oil port 5 10 16 23 28/32 45 56/63 80/90 107/125 160/180 200 250 355/500 1000
SAE Flange port A and B At the rear 01 0 - - ● ● ● ● ● ● ● ● ● ● ● 010
7 - - - - - - - - - - - ● - 017
SAE Flange port A and B located on both sides and opposite each other 02 0 - - ● ● ● ● ● ● ● - ○ - - 020
7 - - - - ● ▲ ▲ ● ● - ● - - 027
9 - - - - - ● ● - - - - - - 029
Opposite side thread oil port A and B 03 0 ● ● ● ● - - - - - - - - - 030
Threaded oil ports A and B Side and back 04 0 - ● ● ● ● ● - - - - ○ - - 040
Bottom SAE flange port 10 A and B (ipsilateral) 10 0 - - - ● ● ● ● ● ● - - ○ - 100
The oil port is equipped with a level 1 relief valve for installing the balance valve BVD 17 1
8		 - - - - - - - ● - 171
178
18 - - - ● ● ● ● ● ● - - - - 181
188
BVE 18 - - - - - - - ● ● - - - -
Oil port connector with relief valve 19 1 - - - ● ● ● ● ● ● - - - - 191
2 - - - ● ● ● ● ● ● - - - - 192
valve
valveless 0
Overflow valve (No pressurization device) 1
Overflow valve (pressurization device) 2
Equipped with balance valve BVD/BVE 7
Equipped with balance valve BVD/BVE 8
Built-in flush valve and oil refill valve 9
Speed sensor 5…16 23…180 200 250…500 710…1000
13 No speed sensor (no code) ● ● ● ● ●
Ready for HDD speed sensor - ▲ ▲ ● - F
Equipped with HDD speed sensor - ▲ ▲ ● - H
Ready for DSA speed sensor - ○ ○ ○ - U
Equipped with DSA speed sensor - ○ ○ ○ - V
Special model
14 Standard version (no code)
Special models of rotary drives (standard version with oil port connector 19) J
Standard/special model
15 Standard version (no code)
Standard versions with different mounting types such as T oil ports open or close opposite to the standard -Y
Special type -S