86-513-83748988
HY Series CY Series HA2F Series HA2F(O)(M) Series HA4V Series HA7V Series HA10V(S)O/31 Series HA10V(S)O/32 Series HA10V(S)O/52 Series HA10V(S)O/53 Series HA10VNO/5* Series HA15V Series
  • Size 40 to 1000
  • Nominal pressure 350 bar
  • Max. pressure 400 bar
  • Open circuit
  • Modular design
  • Variable speed through drive shaft options
  • Visual swing angle indicator
  • HF oil can be operated with reduced operating data
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
pump hydraulic
Technical parameters (theoretical values, excluding efficiency and tolerances, approximate values)
Size 40 71 125 180 200 250/H 355/H
Displacement Vg max cm3 40 71 125 180 200 250/250 355/355
Speed Vg max Max. no max rpm 2600 2200 1800 1800 1800 1500/1900 1500/1700
Vg ≤ Vg max
Max. permisible(Speed limit)		 no perm rpm 3200 2700 2200 2100 2100 1800/2100 1700/1900
Flow rate no max qvo max l/min 104 156 225 324 360 375/475 533/604
nE = 1500 rpm qVE max l/min 60 107 186 270 300 375 533
Power
Δp = 350 bar		 no max PO max kW 61 91 131 189 210 219/277 311/352
nE = 1500 rpm时 PE max kW 35 62 109 158 175 219 311
Torque Vgmax Δp = 100 bar时 T Nm 64 113 199 286 318 398 564
Rotational stiffness Shaft end P c kNm/rad 80 146 260 328 328 527 800
Shaft end Z c kNm/rad 77 146 263 332 332 543 770
Area moment of inertia JTW kgm2 0.0049 0.0121 0.03 0.055 0.055 0.0959 0.19
Max. angular acceleration α rad/s2 17000 11000 8000 6800 6800 4800 3600
Case volume V L 2 2.5 5 4 4 10 8
Approximate weight(including pressure control equipment) m kg 39 53 88 102 102 184 207
Order type
01 02 03 04 05 06 07 08 09 10 11 12 13 14
HA4VS O / -
Operating liquid type 40 71 125 180 200 250 355
01 Mineral oil and HFD oil (no code) ● ● ● ● ● ● ●
HFA, HFB and HFC oil ● ● - - - - - E
Suitable for operation with HFC special performance models ● ● ● ● ●
High-speed model - - - - - ● ● H
Axial piston element
02 Swash plate design, variable pump, nominal pressure 350, Max. pressure 400 bar HA4VS
Auxiliary pump (impeller)
03 Without auxiliary pump (Unclassified number) ● ● ● ● ● ● ●
With auxiliary pump (impeller)
Only with oil circuit board 25 (Service port connection)		 - - - - - ● - L
Operating mode
04 Pump, open circuit O
Size (NG)
05 Displacement Vg Max. [cm3] 40 71 125 180 200 250 355
Control regulating device
06 Pressure control DR ● ● ● ● ● ● ● DR…
Parallel operation of pressure control DP ● ● ● ● ● ● ● DP…
Flow control FR ● ● ● ● ● ● ● FR…
Pressure and flow control DFR ● ● ● ● ● ● ● DFR…
Hyperbolic power control LR ● ● ● ● ● ● ● LR…
Manual control MA ● ● ● ● ● ● ● MA…
Motor control EM ● ● ● ● ● ● ● EM…
Hydraulic control, control volume related HM ● ● ● ● ● ● ● HM…
Hydraulic control via servo and proportional valves HS ● ● ● ● ● ● ● HS…
Electric control EO ● ● ● ● ● ● ● EO…
Hydraulic control, pilot pressure dependent HD ● ● ● ● ● ● ● HD…
Auxiliary speed control DS1 ● ● ● ● ● ● ● DS1…
Electro-hydraulic control system DFE1
System solution SYHDFEE		 DFE1 ● ● ● ● ● ● ● DFE1…
Series
07 ● ● - - - - - 10(11)
- - ● ● ● ● ● 30
Direction of rotation
08 From the end of the shaft Clockwise R
Anti-clockwise L
Sealing material
09 NBR (Nitrile butadiene rubber) , Shaft seal FKM (Viton) ● ● ● ● ● ● ● P
FKM ( Viton ) / suitable for HFD operation ● ● ● ● ● ● ● V
HFC special performance model - - ● ● ● ● ● F
Driving shaft
10 Flat key shaft according to DIN 6885 P
Splined shaft according to DIN 5480 Z
Mounting flange 40 71 125 180 200 250 355
11 Be akin to ISO 3019-2 (Metric system) 4 holes ● ● ● ● ● ● ● B
8 holes - - - - - - - H
Oil port and fastening thread configuration
12 Oil port B and S: SAE flange with 90° lateral offset, metric set screws ● ● ● ● ● ● ● 13
Oil port B and S: SAE flange with 90° lateral offset, metric set screws
2. Pressure oil port B1 relative to B - delivered sealed with nozzle cover plate		 ● ● ● ● ● ● ● 25
Through shaft drive 40 71 125 180 200 250 355
13 Without auxiliary pump, Without Thru-drive shaft ● ● ● ● ● ● ● N00
With Thru-drive shaft for mounting axial piston units, gears or radial piston pumps ● ● - - - - - K…
Universal Thru-drive shaft , adjustable - - ● ● ● ● ● U…
Flange Spline shaft join To be installed
125, 4 holes (ISO) 32x2x14x9g A4VSO/G 40 ● ● ● ● ● ● ● 31
140, 4 holes (ISO) 40x2x18x9g A4VSO/G 71 - ● ● ● ● ● ● 33
160, 4 holes (ISO) 50x2x24x9g A4VSO/G 125 - - ● ● ● ● ● 34
160, 4 holes (ISO) 50x2x24x9g A4VSO/G 180 - - - ● ● ● ● 34
224, 4 holes (ISO) 60x2x28x9g A4VSO/G , A4CSG250 - - - - - ● ● 35
224, 4 holes (ISO) 70x3x22x9g A4VSO/G , A4CSG355 - - - - - - ● 77
315, 8 holes (ISO) 80x3x25x9g A4VSO/G , A4CSG500 - - - - - - - 43
400, 8 holes (ISO) 90x3x28x9g A4VSO/G , A4CSG750 - - - - - - - 76
400, 8 holes (ISO) 100x3x32x9g A4VSO/G 1000 - - - - - - - 88
80, 2 holes (ISO) 3/4 inches 19-4 (SAE A-B) A10VSO 10/52 , 18/31 ○ ● ○ ○ ○ ○ ○ B2
100, 2 holes (ISO) 7/8 inches 22-4 (SAE B) A10VSO 28/31 ● ● ● ● ● ○ ○ B3
100, 2 holes (ISO) 1 inches 25-4 (SAE B-B) A10VSO 45/31 ● ● ● ● ● ● ● B4
125, 2 holes (ISO) 11/4 inches 32-4 (SAE C) A10VSO 71/31 - ● ● ● ● ● ● B5
160, 4 holes (ISO) 11/4 inches 32-4 (SAE C) A10VSO 71/32 - ○ ○ ○ ○ ● ○ B8
125, 2 holes (ISO) 11/2 inches 38-4 (SAE C-C) A10VSO 100/31 - - ○ ○ ○ ○ ○ B6
180, 4 holes (ISO) 11/2 inches 38-4 (SAE C-C) A10VSO 100/32 - - ○ ○ ○ ○ ○ B9
180, 4 holes (ISO) 13/4 inches 44-4 (SAE D) A10VSO 140/31/32 - - - ● ● ● ● B7
82-2 (SAE A) 5/8 inches 16-4 (SAE A) AZ-PF-1X-004...022 ● ● ● ● ● ● ● 01
82-2 (SAE A) 3/4 inches 19-4 (SAE A-B) A10VSO101, 1831/52 (3) ● ● ○ ○ ○ ○ ○ 52
101-2 (SAE B) 7/8 inches 22-4 (SAE B) AZ-PN-1X-020...032 , A10VO 28/31/52 (3) ● ● ● ● ● ● ● 68
101-2 (SAE B) 1 inches 25-4 (SAE B-B) PGH4 , A10VO45/31 ● ● ● ● ● ● ● 04
127-2 (SAE C) 11/4 inches 32-4 (SAE C) A10VO 71/31 - ● ● ● ● ● ● 07
127-2 (SAE C) 11/2 inches 38-4 (SAE C-C) PGH5 , A10VO100/31 - - ● ● ● ● ● 24
152-4 (SAE D) 13/4 inches 44-4 (SAE D) A10VO 140/31 - - - ● ● ● ● 17
Ø 63 (Metric system) , 4 holes Used with key shafts Ø 25 R4 ● ● ○ ○ ○ ○ ○ 57
With Thru-drive shaft, without joint, without matching flange, closed with cover plate ● ● ● ● ● ● ● 99
Filtration (for HS and DS control only )
14 No filter N
Stack valve plate filter (for HS and DS control) Z